It may have been a tedious task but a delicate heritage-listed piece of Far North Queensland's colourful tin mining history has been saved.
Since late last year, local contractors have been carefully repairing the 135-year-old Loudoun Weir at Irvinebank on the Atherton Tablelands.
The operation involved a painstaking mix of a CCTV camera, 20 wheely bins worth of concrete and a hunt for just the right type of tree, with the guidance of locals.
The original timber Loudoun Weir was built in 1885 as part of the Vulcan tin mine complex, with the mill and treatment works on its foreshore.
The weir was upgraded to concrete in 2006, but retained the original timber in the weir's faade.
The first leak was spotted in a 2017 routine inspection and an incoming water entry point was sealed off as a temporary measure.
The permanent seal job started in December 2020 with a significant void found in the weir wall. With the help of a CCTV cable, departmental staff established that five cubic metres - or 20 wheely bins - worth of concrete would fill the void and stop the leak.
Once the dam stopped overflowing mid-year, six logs in the heritage-listed weir faade also had to be replaced, requiring input from locals on like-for-like timber - not to mention the challenge of swapping in 40 metres of logs with heavy machinery on a tight worksite.
Irvinebank Progress Association president Robyne Perkes said the work was "a godsend".
"It has saved our dam, which is a significant part of the history of our town and plays a big role in tourism for us," she said.
"John Moffat built that dam to start the Loudoun Mill and Irvinebank itself.
"The town is very appreciative of the work that was done to seal the dam again and also retain the heritage value of the timber logs in the dam wall."
"We are really happy with the work of the department, and the whole town thanks them for maintaining such an important part of our community."